Hydraulic Oils
Quick Enquiry
Gulf Harmony HVI
Gulf Harmony HVI series are premium quality anti-wear hydraulic oils specially developed for applications subjected to wide range of temperature or where small viscosity change with fluctuating temperature is required. They are formulated with high quality paraffinic base oils, a highly shear stable polymer and an advanced additive system to meet the stringent requirements of modern hydraulic systems. These oils provide excellent protection against oxidation degradation, rust & corrosion and wear. They also possess superior foam control, water separation and rapid air release properties. These oils exceed the performance requirements of global industry standards viz. DIN 51524 Part 3 HVLP, AFNOR NFE 48-603 (HV) & ISO 11158 HV and majority of the international OEMs viz. Poclain, Hitachi, Cincinnati Lamb, Eaton & Denison.
Gulf Harmony Synth
Gulf Harmony Synth series are premium quality ashless fully synthetic environmentally acceptable hydraulic oils specially developed to meet the requirements of the most demanding modern hydraulic systems in industrial and mobile service. These oils are formulated with an advanced anti-wear technology and synthetic base stock to provide outstanding protection to hydraulic equipment and to reduce environmental impact in case of an accidental release into the environment. They exceed the performance requirements of global industry standards viz. DIN 51524 Part 2-HLP, AFNOR NFE 48-603 (HM) and ISO 11158 HM.
Gulf Harmony ZF
Gulf Harmony ZF series are high performance ashless anti-wear hydraulic oils developed to provide excellent performance in hydraulic systems operating under moderate to severe conditions. They are formulated with an advanced ashless anti-wear technology and select base oils to provide reduced environmental impact in case of an accidental release into the environment. They exhibit excellent anti-wear property, thermo-oxidative stability, foam control and water separation properties. They are available in ISO 10 through ISO 100 viscosity grades and exceed the performance requirements of global industry standards viz. DIN 51524 Part 2-HLP, AFNOR NFE 48-603 (HM) & ISO 11158 HM and majority of the international OEMs viz. Denison, Cincinnati Lamb and Eaton (Vickers).
Gulf Harmony
Gulf Harmony series are premium quality multipurpose lubricating oils intended for use in hydraulic systems in industrial and mobile service, compressors, turbines, circulating systems and spur, helical, bevel & worm gearboxes where R&O type of oils are required. These oils are blended from high quality base oils and a proven additive system to provide superior oxidation stability, rust & corrosion protection, foam control and moderate wear protection. They also possess good water separation and rapid air release properties. These oils are available in ISO 15 through ISO 460 viscosity grades. They exceed the performance requirements of DIN 51524 Part 1-HL, ISO 11158-HL, AFNOR NFE 48-603 (HL) and Cincinnati Lamb (formerly Cincinnati Machine) P-38, P-54, P-55 & P-57.
Gulf Security
Gulf Security series are industrial bearing and circulating oils primarily intended for lubrication of circulating systems, total loss systems, low or moderately loaded enclosed gears and air compressors where a straight mineral oil is recommended. These oils are blended from high quality, solvent refined paraffinic base oil and anti-foam agents. They possess inherent resistance to oxidation, high viscosity index, low carbon forming tendency, superior foam control and good water separating capabilities. These oils are available in ISO 32 through ISO 680 viscosity grades.
Gulf Harmony ZF Plus
Gulf Harmony ZF Plus series are premium quality ashless anti-wear hydraulic oils specially developed to meet the requirements of the most demanding modern hydraulic systems in industrial and mobile service. They are formulated with an advanced ashless anti-wear technology and severely hydroprocessed Group II base oils to provide reduced environmental impact in case of an accidental release into the environment. They are specially designed to satisfy the performance requirements of a wide range of hydraulic equipment subjected to high operating pressures & temperatures and to provide extended drain intervals. They possess outstanding thermo-oxidative stability, anti-wear property, rust & corrosion protection, water separation & air-release properties and hydrolytic stability to prolong the equipment and oil life. They are available in ISO 10 through ISO 100 viscosity grades and exceed the performance requirements of global industry standards viz. DIN 51524 Part 2-HLP, AFNOR NFE 48-603 (HM) & ISO 11158 HM and ajority of the international OEMs viz. Denison, Cincinnati Lamb & Eaton (Vickers).
Gulf Security NT 100
Gulf Security NT 100 is a premium quality heavy duty circulating oil specially designed to meet the specific requirements of the Morgan Construction Company’s high speed No-Twist® Rod Mills. It is formulated from high quality base stocks and special additives to provide enhanced film strength & anti-wear performance and excellent protection against oxidative and thermal degradation. It has very good wettability and provides protection against rust and corrosion. It also possesses superior demulsibility characteristics.
Gulf Harmony AW Plus Super Clean
Gulf Harmony AW Plus Super Clean series are premium quality anti-wear hydraulic oils specially developed to meet the requirements of the most demanding modern hydraulic systems in industrial and mobile service requiring super clean oils. These oils are formulated with severely hydroprocessed Group II base oils and a carefully selected additive system to satisfy the performance requirements of a wide range of hydraulic equipment. They possess outstanding thermo-oxidative stability, anti-wear property, rust & corrosion protection, water separation & air-release properties and hydrolytic stability to prolong the equipment and oil life. They exceed the performance requirements of global industry standards viz. DIN 51524 Part 2-HLP, AFNOR NFE 48-603 (HM) & ISO 11158 HM and majority of the international OEMs viz. Denison, Cincinnati Lamb & Eaton.
Gulf Harmony AW Plus
Gulf Harmony AW Plus series are premium quality anti-wear hydraulic oils specially developed to meet the requirements of the most demanding modern hydraulic systems in industrial and mobile service. These oils are formulated with severely hydroprocessed Group II base oils and a carefully selected additive system to satisfy the performance requirements of a wide range of hydraulic equipment subjected to high operating pressures & temperatures and to provide extended drain intervals. They possess outstanding thermo-oxidative stability, anti-wear property, rust & corrosion protection, water separation & air-release properties and hydrolytic stability to prolong the equipment and oil life. They are available in ISO 10 through ISO 100 viscosity grades and exceed the performance requirements of global industry standards viz. DIN 51524 Part 2-HLP, AFNOR NFE 48-603 (HM) & ISO 11158 HM and majority of the international OEMs viz. Denison, Cincinnati Lamb & Eaton (Vickers).
Gulf Harmony AW Super Clean
Gulf Harmony AW Super Clean series are high performance anti-wear hydraulic oils developed for high pressure hydraulic systems operating under moderate to severe conditions in mobile and industrial service requiring super clean oils. These oils are formulated with high quality base oils and field proven performance additives to provide excellent protection against oxidation degradation, rust & corrosion and wear. They also possess superior foam control, water separation and rapid air release properties. They exceed the performance requirements of global industry standards viz. DIN 51524 Part 2-HLP & ISO 11158 HM and majority of the international OEMs viz. Denison, Cincinnati Lamb & Eaton (Vickers).
Gulf Harmony AW
Gulf Harmony AW series are high performance anti-wear hydraulic oils developed for high pressure hydraulic systems operating under moderate to severe conditions in mobile and industrial service. These oils are formulated with high quality base oils and carefully selected performance additives to provide excellent protection against oxidation degradation, rust & corrosion and wear. They also possess superior foam control, water separation and rapid air release properties. The lower viscosity grades (ISO 10 through 100) are formulated with field proven thermally stable zinc based anti-wear additive system and the higher viscosity grades (ISO 150 through 460) are based on ashless anti-wear additive system They exceed the performance requirements of global industry standards viz. DIN 51524 Part 2-HLP, AFNOR NFE 48-603 (HM) & ISO 11158 HM and majority of the international OEMs viz. Denison, Cincinnati Lamb & Eaton (Vickers).
Gulf Harmony CME
Gulf Harmony CME series are supreme quality anti-wear hydraulic oils exclusively developed for construction and mining equipment in off highway applications requiring very high viscosity index oils to minimize the changes in viscosity even under wide temperature variation. These oils are formulated with severely hydroprocessed base oils, highly shear stable polymer and high performance additive system to meet the stringent requirements of modern hydraulic systems using high pressure high output pumps. Gulf Harmony CME exceeds the performance requirements of global industry standards like DIN 51524 Part 3 HVLP and majority of the international OEMs viz. Poclain, Hitachi, Eaton, Denison and others.
Gulf Harmony HVI Plus Super Clean
Gulf Harmony HVI Plus Super Clean series are supreme quality anti-wear hydraulic oils specially developed for applications requiring super clean oils and subjected to wide range of temperature or where small viscosity change with fluctuating temperature is needed. They are formulated with severely hydroprocessed Group II base oils, a highly shear stable polymer and an advanced additive system to meet the stringent requirements of modern hydraulic systems. Their outstanding thermo-oxidative stability and low & high temperature performance allows for extended service life. They provide excellent anti-wear property, rust & corrosion protection, water separation & air-release properties and hydrolytic stability to reduce breakdowns and help improve production capacity. They exceed the performance requirements of global industry standards viz. DIN 51524 Part 3 HVLP, AFNOR NFE 48-603 (HV) & ISO 11158 HV and majority of the international OEMs viz. Poclain, Hitachi, Cincinnati Lamb, Eaton & Denison.
Gulf Harmony HVI Plus
Gulf Harmony HVI Plus series are supreme quality anti-wear hydraulic oils specially developed for applications subjected to wide range of temperature or where small viscosity change with fluctuating temperature is needed. They are formulated with severely hydroprocessed Group II base oils, a highly shear stable polymer and an advanced additive system to meet the stringent requirements of modern hydraulic systems. Their outstanding thermo-oxidative stability and low & high temperature performance allows for extended service life. They provide excellent anti-wear property, rust & corrosion protection, water separation & air-release properties and hydrolytic stability to reduce breakdowns and help improve production capacity. They exceed the performance requirements of global industry standards viz. DIN 51524 Part 3 HVLP, AFNOR NFE 48-603 (HV) & ISO 11158 HV and majority of the international OEMs viz. Poclain, Hitachi, Cincinnati Lamb, Eaton & Denison.
Gulf Harmony HVI Super Clean
Gulf Harmony HVI Super Clean series are premium quality anti-wear hydraulic oils specially developed for applications requiring super clean oils and subjected to wide range of temperature or where small viscosity change with fluctuating temperature is needed. They are formulated with high quality paraffinic base oils, a highly shear stable polymer and an advanced additive system to meet the stringent requirements of modern hydraulic systems. These oils provide oxidation protection, superior foam control, water separation and rapid air release properties. They exceed the performance requirements of global industry standards viz. DIN 51524 Part 3 HVLP, AFNOR NFE 48-603 (HV) & ISO 11158 HV and majority of the international OEMs viz. Poclain, Hitachi, Cincinnati Lamb, Eaton and Denison.
